Community-built radio mesh

Southern Arizona MeshCore

Build LoRa radio nodes, test off-grid messaging, and learn how mesh networks work with other Southern Arizona MeshCore enthusiasts.

Join the Facebook group

Sign in to Facebook to request to join the private group.

Radio settings and MeshCore channel

Southern Arizona MeshCore map

Explore publicly mapped MeshCore nodes and repeaters around Tucson, Benson, Willcox, Sierra Vista, and Nogales. Pan or zoom to explore, and select a marker for node details.

Open the full MeshCore map

Southern Arizona MeshCore radio settings

Enter these LoRa radio settings on your MeshCore node to match the Southern Arizona mesh.

Frequency
908.205 MHz
Bandwidth
62.5 kHz
Spreading factor
SF9
Coding rate
CR8

Southern Arizona MeshCore channel #soazmeshcore

Add the channel in your MeshCore app with the leading #.

MeshCore Quick Start Guide

Southern Arizona MeshCore Quick Start Guide. A text version follows.
Open the full-size infographic
Read the six setup steps
  1. Prepare your radio. Choose a supported LoRa device, attach the antenna, and charge the battery.
  2. Install the firmware. Use the official setup tool. For phone pairing, choose Bluetooth Companion firmware for your exact board. Skip this step if it is already installed.
  3. Connect your phone. Install the MeshCore app on iPhone or Android, allow Bluetooth access, and connect to your radio from inside the app.
  4. Match your local mesh. Set your display name and enter the Southern Arizona radio settings.
  5. Introduce your node. Send an advert to announce your radio, discover nearby nodes, and add contacts.
  6. Send a first message. Try #soazmeshcore or send a direct message after adding each other as contacts.

If you receive no reply, check the radio settings, antenna, range, and nearby repeaters. Visit MeshCore for setup tools and apps.

What is MeshCore?

MeshCore uses low-power LoRa radios to send short messages without cell service or internet access. Repeaters can relay messages between radios that are out of direct range when there’s a path through the mesh.

Build a node

Compare handheld radios, antennas, and repeater setups.

Test coverage

Share field tests and see how terrain affects your signal.

Get on the mesh

Ask setup questions and connect with other local builders.

Mesh networking across Southern Arizona

Building a MeshCore node in Tucson, Benson, Willcox, St. David (Saint David), Sierra Vista, or Nogales? Join the group to compare LoRa radios, ask about repeater placement, and share field tests with other builders in Pima, Cochise, and Santa Cruz counties.

When sharing a coverage test, include the general route, antenna height, and terrain. That helps local builders compare what works across desert valleys, mountain passes, and the I-10 and I-19 corridors.